Lucky You: There's never been a clear lens upgrade for the Bosch Low Beam projectors, which are used on many different late 90's early 2000's European vehicles. Luckily for you, the Morimoto Retro-Quik system is designed as a direct bolt-on upgrade for a big performance boost inside the lights on all cars equipped with Bosch's 2.4" Lens Low Beam projectors.

Bi-Xenon Projectors: Morimoto's most modern bi-xenon, the Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since way back when the 1.0 came out, it's now one of the most advanced headlight projectors in the world today. Revised reflector optics paired with their curved cutoff shield produces one of the widest low beam patterns we've ever seen. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.

Mounting Hardware: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of the kit are designed to adapt the Morimoto Mini 7.0 Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.

Optional H1 HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in fog lights--and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same lumin Osity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

Optional OEM Ballast Adapters: If you're using your stock HID ballasts with the H1 HID bulbs required for these projectors, you'll need a pair of the optional D2S to AMP ballast adapters to do it. They're completely plug and play and work great with the Morimoto XB HID Bulbs!

Optional High Beam Splitters: Double high beams?! whaaaat! Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector's high beam solenoid, making them both work at the same time.

Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end fog lights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn't prevent their new fog lights from fogging up is beyond us. It'll be the best twelve bucks you've ever spent.